Drag to move the artwork · scroll to zoomWorking …
Filament shopping list
Suggestions are the closest colours from the filament lines ticked under Colours → Filaments (ΔE = colour distance, below 5 looks nearly identical). Weights are estimates for the whole wall.
Print plan
How to print the tiles
- Bambu Studio says “The 3mf file has invalid config, load geometry data only”. Click OK: parts, colours and plates are kept, print settings come from your own presets.
- Tiles lie face down and are mirrored for that, so the artwork reads correctly once you flip the tile.
- Suggested: 0.2 mm layers, smooth or textured PEI depending on the finish you want, outer brim, prime tower on.
- A tile only needs the filaments that appear on it, so a 4-slot AMS can print walls with more colours tile by tile.
- Print the colour & fit test first: your motif in miniature (160 × 120 mm) with real-size slots for your Skådis hooks, plus access holes with cover caps, an M4 hole and a snap-pin hole to check the fit.